Trail King APB 2000
2000CF Pneumatic Tank Trailer
SPECIFICATIONS
GENERAL
1. TYPE PNEUMATIC DRY BULK, ALUMINUM VESSEL
2. BARREL SHAPE 4 HOPPER
3. OPERATING PRESSURE 15 PSIG
4. PRODUCT COMPATIBLE WITH MATERIALS AND DESIGN OF TANK
5. INSPECTIONS FHWA INSPECTIONS REQUIRED BY 49 CFR 396.17 PERFORMED BY FACTORY AND LABEL INSTALLED
Section (A) - BARREL
1. CAPACITY 2000 CU. FT. - 4 HOPPER
2. COMPARTMENTS ONE
3. BAFFLES NONE
4. TANK CONSTRUCTION SMOOTH EXTERIOR INTERNAL RINGS 4-HOPPERS
5. END FRAMES ALUMINUM END FRAMES
6. INTERIOR WELDS FOOD GRADE INTERIOR
7. SHELL FINISH (ALUMINUM) BRIGHT FINISH TOP AND SIDES (HOPPER BOTTOMS ARE MILL FINISH)
8. MANHOLE (4) KNAPPCO FULL OPEN WITH SIX CAM CLOSURE
9. MANHOLE ACCESSORIES NONE
Section (B) - KINGPIN
1. KING PIN PLATE HEAVY DUTY, BOLTED WITH 1.5" INCREMENTS
Section (C) - RUNNING GEAR
1. SUSPENSION HENDRICKSON HN INTRAAX WITH 5" INTERGRAL AXLE, 77.5" TRACK WITH TN TYPE SPINDLE, 23,000 LB. BEAM AND BEARING RATING. EQUIPPED WITH MGM TP30/30 SPRING BRAKE CHAMBERS AND AUTOMATIC SLACK ADJUSTERS. AUTOMATIC GLADHAND DUMP AND MANUAL DUMP.
2. AXLES AXLE INCLUDED WITH INTRAAX
3. THIRD AXLE NONE
4. SPREAD AXLE NONE
5. BRAKES 16-1/2" X 7", NON-ASBESTOS
6. ABS ABS-WABCO 4S-2M WIRED TO BLUE WIRE WITH DIAGNOSTIC CABLE
7. HUBS CONMET, ALUMINUM TN 10-STUD HUB PILOTED WITH 5 YEAR/500,000 MILE WARRANTY, BOLT ON HUBCAP, PRE-SET WITH MOBILITH 007 SEMIFLUID GREASE
8. DRUMS 16-1/2" X 7" OUTBOARD CENTRIFUSE DRUMS
9. BUMPER 10" ALUMINUM MEETING WHEEL BACK REQUIREMENTS
10. AIR TANKS STEEL AIR TANKS
11. TIRE INFLATION NONE
Section (D) - TIRES/WHEELS
1. TIRES 11R-22.5 (G) GOODYEAR WINGFOOT RADIALS WITH 14-PLY RATING
2. WHEELS 8.25 X 22.5 FOR 10 HOLE HUBS, ALUMINUM MILL FINISH, HUB PILOTED
Section (E) - LANDING GEAR
1. LANDING GEAR CONTENDER 2-SPEED WITH DRIVERSIDE CRANK
2. TIRE CARRIER NONE
Section (F) - LADDER/WALKWAY
1. LADDER ALUMINUM, DRIVERSIDE MOUNTED OVER REAR WITH GRIP STRUT TOP STEP AND STEP BELOW BUMPER
2. INTERIOR ACCESS LADDER NONE
3. WALKWAY SKID RESISTENT ADHESIVE TAPE BETWEEN TOE RAILS TOP OF TANK
4. FLASHING RAILS FULL LENGTH AT TOP WITH DRAIN HOSES
Section (G) - VALVING/PIPING
1. AIR INLET LINE 3" LINE ON DRIVERSIDE WITH (2) 3" CHECK VALVES
2. AIR TO AIR COOLER NONE
3. FILTER NONE
4. JUMPER HOSE NONE
5. PRESSURE CONTROL VALVE ULTRAFLO 3" ALUMINUM BUTTERFLY VALVE (STAINLESS STEEL DISC WITH WHITE SEATS)
6. BLOW-DOWN LINE 3" ALUMINUM WITH (1) 3" SURE SEAL BUTTERFLY VALVE AND BAYCO RELIEF VENT
7. TOP AIR LINE 3" LINE WITH (1) 3" CHECK VALVE
8. PRODUCT VALVE 6" #390 ULTRAFLO, ALUMINUM BODY, STAINLESS STEEL DISC, WHITE SEAT, OPERATED FROM DRIVERSIDE WITH CAST ALUMINUM HANDLE.
9. PRODUCT TEE 6" X 4" CAST ALUMINUM STRAIGHT TEE
10. PRODUCT LINE 4" SCH 40 ALUMINUM LINE WITH GROOVED PIPE CONNECTORS
11. PRODUCT LINE/SIGHT GLASS NONE
12. REAR DISCHARGE LINE 4"SCH 40 ALUMINUM TERMINATING AT REAR BELOW AXLES WITH MALE ADAPTOR AND CAP
13. LOAD LINE EXTENSION NONE
14. LOAD LINE/GROUND LEVEL NONE
15. LOAD LINE/REAR HEAD NONE
16. LOAD LINE/SIGHT GLASS NONE
17. AERATION (3) SOLIMAR FLUIDIZERS AT EACH HOPPER WITH HOPPER SAVERS, INCLUDES INDIVIDUAL 2" BRASS/STAINLESS BALL VALVES AT EACH HOPPER
18. GAUGES (2) 4" LIQUID FILLED, (1) TANK, (1) LINE, IN CABINET MOUNTED IN FRONT OF TANDEM FACING FORWARD WITH LIGHT
19. SILENCER NONE
Section (H) - VENTING
Section (I) - HOSE CARRIER
1. HOSE CARRIER (1) 8" X 21' ALUMINUM W/DOORS AT BOTH ENDS
2. LOCATIONS LOCATED CURBSIDE
3. HOSE HOLDER ADJUSTABLE ALUMINUM HOLDER WITH DUMMY HOSE END COUPLER FOR FREE END OF HOSE
4. PRODUCT HOSE NONE
Section (J) - WIRING
1. NOSE BOX ATA 7-WAY, BLUE WIRED TO ABS SYSTEM
2. LIGHTS TRUCK-LITE LIGHTS & HARNESS SYSTEM. SIDE CENTER MARKER LIGHTS WIRED TO FLASH WITH TURN SIGNALS.
3. WIDE TURN LIGHTS NONE
4. SWIVEL LIGHTS NONE
5. BACKUP LIGHTS NONE
Section (K) - FENDER
1. FENDERS ALUMINUM FRONT AND REAR
Section (L) - PAINT/DECAL
1. PAINT CARBON STEEL PARTS PRIMED AND PAINTED. STEEL PARTS PAINTED SILVER ENAMEL
2. CONSPICUITY REFLECTIVE STRIPING INSTALLED ON EACH SIDE AND REAR OF TRAILER, CONSPICUITY MARKING TAPE PER DOT REQUIREMENTS
3. DECALS NO CUSTOMER SPECIFIC DECALS
Section (M) - MISC
1. MUDFLAPS (2) PAIR OF ANTISAIL
2. HUBODOMETER NONE
3. REGISTRATION HOLDER (1) TRUCK-LITE MOUNTED DRIVERSIDE NEAR FRONT
