Trail King 1600CF Vacuum Pneumatic Tank
SPECIFICATIONS
GENERAL
1. TYPE PNEUMATIC DRY BULK, ALUMINUM VESSEL
2. BARREL SHAPE 4 HOPPER
3. OPERATING PRESSURE 15 PSIG
4. PRODUCT COMPATIBLE WITH MATERIALS AND DESIGN OF TANK
5. INSPECTIONS FHWA INSPECTIONS REQUIRED BY 49 CFR 396.17 PERFORMED BY FACTORY AND LABEL INSTALLED
6. WARRANTY STANDARD THREE YEAR
Section (A) - BARREL
1. CAPACITY 1684 CU. FT. - 4 HOPPER
2. COMPARTMENTS ONE
3. BAFFLES NONE
4. TANK CONSTRUCTION SMOOTH EXTERIOR INTERNAL RINGS 4-HOPPERS
5. END FRAMES ALUMINUM END FRAMES
6. INTERIOR WELDS Food Grade CLASS ll
7. SHELL FINISH (ALUMINUM) BRIGHT FINISH TOP, SIDES AND HOPPER BOTTOMS
8. MANHOLE (4) KNAPPCO FULL OPEN WITH SIX CAM CLOSURE
9. MANHOLE ACCESSORIES NONE
10. STRUTS ALUMINUM END FRAMES
Section (B) - KINGPIN
1. KING PIN PLATE HEAVY DUTY, BOLTED WITH 1.5" INCREMENTS
Section (C) - RUNNING GEAR
1. SUSPENSION HENDRICKSON HN INTRAAX WITH 5" INTERGRAL AXLE, 71.5" TRACK WITH HN TYPE SPINDLE, 23,000 LB. BEAM AND BEARING RATING. EQUIPPED WITH MGM TP30/30 SPRING BRAKE CHAMBERS AND AUTOMATIC SLACK ADJUSTERS. AUTOMATIC GLADHAND DUMP AND MANUAL DUMP.
2. AXLES INVERTED DROP CENTER INTRAAX AXLES
3. THIRD AXLE NONE
4. SPREAD AXLE NONE
5. BRAKES 16-1/2" X 7", NON-ASBESTOS
6. ABS ABS-WABCO 4S-2M WIRED TO BLUE WIRE WITH DIAGNOSTIC CABLE
7. HUBS ALUMINUM HN 10-STUD HUB PILOTED, BOLT ON HUBCAP AND MOBILITH 007 SEMIFLUID GREASE
8. DRUMS 16-1/2" X 7" OUTBOARD CENTRIFUSE DRUMS
9. BUMPER 10" ALUMINUM MEETING WHEEL BACK REQUIREMENTS
10. AIR TANKS STEEL AIR TANKS
11. TIRE INFLATION NONE
Section (D) - TIRES/WHEELS
1. TIRES 11R-22.5 (G) GENERAL RIB ST250 14-PLY RATING
2. WHEELS 8.25 X 22.5 FOR 10 HOLE HUBS, ALUMINUM MACHINE FINISHED, HUB PILOTED
Section (E) - LANDING GEAR
1. LANDING GEAR CONTENDER 2-SPEED WITH DRIVERSIDE CRANK
2. TIRE CARRIER NONE
Section (F) - LADDER/WALKWAY
1. LADDER ALUMINUM, DRIVERSIDE MOUNTED OVER REAR WITH GRIP STRUT TOP STEP AND STEP BELOW BUMPER
2. INTERIOR ACCESS LADDER NONE
3. WALKWAY SKID RESISTENT ADHESIVE TAPE BETWEEN TOE RAILS TOP OF TANK
4. FLASHING RAILS FULL LENGTH AT TOP WITH DRAIN HOSES
Section (G) - VALVING/PIPING
1. PRESSURE CONTROL VALVE 3" ALUMINUM BUTTERFLY VALVE (STAINLESS STEEL DISC WITH WHITE SEAT)
2. BLOW-DOWN LINE 3" ALUMINUM WITH (1) 3" ULTRA FLOW BUTTERFLY VALVE AND BAYCO RELIEF VENT
3.TOP AIR LINE INCLUDED
4. AIR TO AIR COOLER NONE
5. HOT AIR FILTER/SILENCER NONE
6. PRODUCT VALVE 6" #390 ULTRAFLO, ALUMINUM BODY, STAINLESS STEEL DISC, WHITE SEAT, OPERATED FROM DRIVERSIDE WITH CAST ALUMINUM HANDLE.
7. PRODUCT TEE 6" X 4" CAST ALUMINUM STRAIGHT TEE
8. PRODUCT LINE 4" SCH 40 ALUMINUM LINE WITH GROOVED PIPE CONNECTORS
9. REAR DISCHARGE LINE 4"SCH 40 ALUMINUM TERMINATING AT REAR BELOW AXLES WITH MALE ADAPTOR AND CAP
10. AERATION NONE NONE NONE
11. GAUGES (2) 4" LIQUID FILLED, (1) TANK, (1) LINE, MOUNTED BETWEEN HOPPERS 1 & 2 ON DRIVERSIDE, (2) 4" LIQUID FILLED, (1) TANK, (1) FILTER FOR VACUUM LOADING MOUNTED IN CABINET FACING TO REAR DRIVERSIDE WITH LIGHT
12. VACUUM RETURN LINE 4" SCH 10 ALUMINUM PIPE FROM FILTER TO TOP RAIL AND FRONT DRIVERSIDE INLET WITH MALE ADAPTER AND DUST CAP.
13. VACUUM FILTER CONTROL 4" BUTTERFLY VALVE WITH S.S. DISC AND WHITE SEAT IN LINE BETWEEN TANK AND FILTER.
14.VACUUM DUMP 4' VACUUM DUMP LINE AT REAR WITH 4" BUTTERFLY VALVE WITH S.S. DISC AND WHITE SEAT AND MALE ADAPTER AND DUST CAP.
15. VACUUM RELIEF 15" HG VACUUM RELIEF MOUNTED IN VACUUM LINE AT FRONT
16. VACUUM FILTER CYCLONE TYPE 24" TUBE TYPE CANISTER. 36" LONG TUBES ARE MOUNTED ON A REMOVABLE PLEUM PLATE. FILTER HAS SIGHT GLASS IN REAR JUST BELOW TUBE LEVEL FOR EASY INSPECTION. 4" FULTER DRAIN IS EQUIPED WITH A 4" BUTTERFLY VALVE WITH S.S. DISC AND WHITE SEATS, 2" BALL VALVE IS PIPED INTO THE CANISTER FOR EASY CONTROL OF VACUM LEVEL. LID IS SECURED W/9 CAMLOCKS.
17. FILL LINE 5" SCH 40 ALUM PIPE NEAR REAR CROSSMEMBER TO NEAR REAR MANHOLE INSIDE OF TANK. LINE TERMINATES OUTSIDE W/MALE ADAPTER AND DUST CAP AND INSIDE LINE TERMINATED WITH PLAIN END PIPE.
18. ADDITIONAL FILL LINE 5" SCH 40 ALUM PIPE NEAR REAR CROSSMEMBER TO NEAR REAR 2ND MANHOLE FROM REAR. LINE TERMINATES OUTSIDE W/MALE ADAPTER AND DUST CAP AND INSIDE LINE TERMINATED WITH PLAIN END PIPE.
19. SILENCER NONE
Section (H) - VENTING
Section (I) - HOSE CARRIER
1. HOSE CARRIER (2) 8" X 21' ALUMINUM W/DOORS AT REAR (LOCATED ONE STREET SIDE AND ONE CURBSIDE REAR)
2. ADDITIONAL HOSE CARRIER (1) 10" X 10' ALUMINUM W/DOOR AT REAR (LOCATED CURBSIDE CENTER MAIN FRAME)
3. LOCATIONS SEE ABOVE
4. HOSE HOLDER ADJUSTABLE ALUMINUM HOLDER WITH DUMMY HOSE END COUPLER FOR FREE END OF HOSE
5. PRODUCT HOSE NONE
Section (J) - WIRING
1. NOSE BOX ATA 7-WAY, BLUE WIRED TO ABS SYSTEM
2. LIGHTS L.E.D. LIGHTS & HARNESS SYSTEM. SIDE CENTER MARKER LIGHTS WIRED TO FLASH WITH TURN SIGNALS.
3. WIDE TURN LIGHTS NONE
4. SWIVEL LIGHTS NONE
5. BACKUP LIGHTS NONE
Section (K) - FENDER
1. FENDERS ALUMINUM FRONT AND REAR
Section (L) - PAINT/DECAL
1. PAINT CARBON STEEL PARTS PRIMED AND PAINTED. STEEL PARTS PAINTED SILVER ENAMEL
2. CONSPICUITY REFLECTIVE STRIPING INSTALLED ON EACH SIDE AND REAR OF TRAILER, CONSPICUITY MARKING TAPE PER DOT REQUIREMENTS
3. DECALS NO CUSTOMER SPECIFIC DECALS
Section (M) - MISC
1. MUDFLAPS (2) PAIR OF ANTISAIL
2. HUBODOMETER NONE
3. REGISTRATION HOLDER (1) TRUCK-LITE MOUNTED DRIVERSIDE NEAR FRONT
