TRAIL KING TK1033 CF Drybulk Pnematic Trailer
Specifications:
A. VESSEL
1. Capacity: 1000 cubic feet nominal - 3 hoppers.
2. Tank Smooth exterior, internal rings. 5454-H32 aluminum vessel,
Construction: 45 degree hopper slope with weld-on spun cones. HUCK riveted Aluminum end frames with aluminum cross-members. Frames HUCK riveted to vessel and equipped with Aluminum struts.
3. Interior Welds: Class I
4. Manholes: Two LM1151 20" cast aluminum covers, pressure type with 6 cam actuated adjustable hold-downs, black Buna-N gaskets in cover. Replaceable wear plates under hold downs. One stainless steel cover retainer per manhole. Manhole hinged on street side.
5. Shell Finish: Mill finish.
6. Baffles: None.
7. Documentation: Unit static tested to 15 PSI Professional cleaning is recommended prior to initial loading to avoid possible contamination of cargo. 125 degree maximum operating temperature.
8. Product Info: Cement and/or like pulverlents.
B. TANK FITTINGS & PIPING
1. Air Inlet Line: 3" aluminum line with THREADED 3" adapter at street side front of tank (1) Knappco swing spring check valve near PTO inlet, (1) Knappco swing spring check valve near #1 hopper valve.
2. Aeration: Solimar aeration system with 3" aluminum air manifold routed down curbside, 2" hoses supplying air to 3 aerators per hopper with hopper savers.
3. Prop/Pres Ctl Valve: (1) ULTRAFLO 3" fig. 400, aluminum body butterfly valve (nodular iron disc, Black Nitrile seat) located roadside
to regulate air flow.
4. Blow-Down Line: 3" aluminum with (1) 3" ULTRAFLO, fig. 400, aluminum-body butterfly valve (nodular iron disc, Black Nitrile seat)
15 P.S.I. relief valve
5. Top-Air Line: None
6. Product Valves: 5" ULTRAFLO fig 400 butterfly, aluminum body, iron disc, white Nitrile seat, operated from street side with cast aluminum handle.
7. Product Tee: 5" cast aluminum, non-gravity
8. Product Line: 4" schedule 40 aluminum line with SHORT HOSE SECTION connectors between hoppers.
9. Rear Discharge Line: 4" schedule 40 aluminum, over axles to rear of trailer, with threaded adapter and cap.
10.Gauges: Two 4" liquid filled, one tank, one line, with light located street side in box forward of tandem. Gauge pressure range 0-30 PSI.
C. ACCESSORIES
1. Ladder: Aluminum, EXTREME rear WITH WALKWAY, serrated rungs with grab handles at top step.
2. Hose Tubes: Two 8" x 21' aluminum with cast aluminum rear door mounted street side & curbside
3. Walkway: Skid-resistant adhesive tape between toe rails.
4. Tire Carrier: None
5. Fenders: Aluminum double contour on rear, single contour at front.
6. Splash Guard: Black anti-sail mud flaps, SEP standard.
7. Lights: 12V system to FMVSS 108 including conspicuity tape each side. Truck Lite LED sealed lamp system. Combination mid-tank clearance and turn signal light. Hi-mounted third stop light rear center of tandem. Additional markers side mounted on curb and street side
8. Wiring 12V system, 7-wire molded conduit throughout, 7 way ATA connector. Aluminum light box at rear (2).
9. Hose Holder: PTO hose holder at nose.
10.Cabinet: None
D. CHASSIS
1. Upper Fifth 5/16" hi-tensile steel adjustable in 1-1/2" increments.
Wheel: 2" forged kingpin.
2. Skid Plate: None.
3. Landing Legs: Binkley 51000 model 2 speed, street side crank, 50,000 lb. with sandshoes.
4. Suspension: Intraax AANNT Hendrickson 23K AIR RIDE.
5. Springs: None, Air bags
6. Brake System: Standard steel (1) tank system meeting FMVSS 121 requirements with Rockwell Q-style (quick change) 16-1/2" x 7" S-cam brakes. Phillips "Quick Release" glad hand on service line. Rockwell Wabco Easy Stop 4S/2M antilock brake system. Constant power is standard on auxiliary (blue) circuit of SAE J560 7 way.
7. Brake Chamber: MGM 30-30 parking/emergency long stroke spring brake with stroke alert feature.
8. Brake Lining: Abex 3030-197 non-asbestos lining.
9. Slack Adjuster: Meritor automatic slack adjuster.
10.Axles: Intraax Standard with parallel spindles
11.Oil Seals: Stemco, visible caps, leather seal.
12.Paint: Gray DuPont Imron 5000 on steel parts only.
E. Hubs & Drums:
10 Stud (Hub Pilot) aluminum hubs. Outboard centrifuse drums.
F. Wheels:
10 Stud (Hub Pilot) 8.25 x 22.5 Aluminum Wheels (Mill Finish)
G. Tires:
General ST250 14Ply 11R22.5 Tubeless Radials (Tire Brand Subject to Availability)
H. Miscellaneous:
1. Warranty - Standard
