2010 TRAILKING 1600 CF EXT RING DRY BULK
A. VESSEL
1. Capacity: 1600 cubic feet - 4 hoppers.
2. Tank: Smooth interior, external rings. 5454-H32 aluminum vessel,
Construction: 45 degree hopper slope with weld-on spun cones. HUCK riveted Aluminum end frames with aluminum cross-members. Frames HUCK riveted to vessel and equipped with aluminum struts.
3. Interior Welds: Class III All welds ground and buffed. Manhole collars flushed with top shell
4. Manholes: Four 20" LM1151 cast aluminum covers, pressure type with 6 cam actuated adjustable hold downs, white Buna-N gaskets in cover. Replaceable wear plates under hold downs. One stainless steel cover retainer per manhole. Manhole hinged on street side.
5. Shell Finish: Aluminum Bright Finish top and sides. Hopper bottoms mill finish
6. Baffles: None.
7. Documentation: Unit pressure tested. Professional cleaning is recommended prior to initial loading to avoid possible contamination of cargo 125 degree maximum operating temperature.
B. TANK FITTINGS & PIPING
1. Air Inlet Line: 3" aluminum line with THREADED 3" adapter at street side front of tank (1) Bayco swing spring check valve near PTO inlet, (1) Bayco swing spring check valve near #1 hopper valve.
2. Aeration: Solimar aeration system with 3" aluminum air manifold routed down curbside, 2" hoses supplying air to 3 aerators per hopper with hopper savers. Solimar 5100 EZ out access door, one per hopper
3. Prop/Pres Ctl Valve: (1) ULTRAFLO 3" fig. 390, two piece aluminum body butterfly valve (stainless steel one piece disc & stem, white Nitrile seat) operated street side
4. Blow-Down Line: 3" aluminum with (1) 3" ULTRAFLO, fig. 390, two piece aluminum body butterfly valve (stainless steel one piece disc & stem, white Nitrile seat) 15 P.S.I. relief valve
5. Top Air Line: 3" aluminum with (1) 3" Ultraflo fig. 390, two piece aluminum body butterfly valve (stainless steel one piece disc & stem, white nitril seat)
6. Product Valves: 5" ULTRAFLO fig. 390 butterfly, two piece aluminum body, one piece stainless steel disc & stem, white Nitrile seat, operated from street side with cast aluminum handle.
7. Product Tee: 5"Cast aluminum, non-gravity for 4" line.
8. Product Line: 4" aluminum schedule 40, with snap joint connectors between tees
9. Rear Discharge Line: 4" aluminum schedule 40, routed under axles to rear of trailer with threaded adapter and cap
10. Gauges: Two 4" liquid filled, one tank, one line, with light located street side in box forward of tandem. Gauge pressure range 0-30 PSI.
C. ACCESSORIES
1. Ladder: Aluminum, mounted at rear of trailer, serrated rungs with grab handles at top step.
2. Hose Tubes: One 8" x 21' aluminum with cast aluminum rear door, located at curbside.
3. Walkway: Aluminum grip strut walkway mounted curbside from rear ladder to front transition seam
C. ACCESSORIES, cont.
4. Tire Carrier: None.
5. Fenders: Aluminum double contour on rear, single contour at front.
6. Splash Guard: Black anti-sail mud flaps, SEP standard.
7. Lights: 12V system FMVSS 108 including conspicuity tape each side Grote LED sealed flange mount lamp system Combination mid-tank clearance and turn signal light. Hi-mounted third stop light rear center of tandem.
8. Wiring: 12V system, 7 wire molded conduit throughout, 7-way ATA connector Aluminum light boxes at rear (2).
9. Hose Holder: PTO hose holder at nose
10. Cabinet: None
D. CHASSIS
1. Upper Fifth Wheel: 2" forged kingpin.5/16" hi-tensile steel adjustable in 1-1/2" increments
2. Skid Plate: None
3. Landing Legs: Binkley model #51000 2 speed with street side crank, 50,000 lb. with sandshoes with HD support kit
4. Suspension: Intraax AAT 23K Air Ride Suspension with automatic dump valve for air bags.
5. Springs: None, Air bags
6. Brake System: Standard steel (1) tank system meeting FMVSS 121 requirements with Rockwell Q-style (quick change) 16-1/2" x 7" S-cam brakes. Phillips "Quick Release" glad hand on service line Rockwell Wabco Easy Stop 4S/2M antilock brake system Constant power is standard on auxiliary (blue) circuit of SAE J560 7 way
7. Brake Chamber: MGM 30-30 parking/emergency long stroke spring brake with stroke alert feature.
8. Brake Lining: Abex 3030-197 non-asbestos lining.
D. CHASSIS, cont.
9. Slack Adjuster: Automatic slack adjuster (factory standard)
10. Axles: 71 1/2" Inverted raised center axle with parallel spindles
11. Oil Seals: Stemco, visible caps, leather seal.
12. Paint: Gray DuPont Imron 5000 on steel parts only.
E. Hubs & Drums: 10 Stud (Hub Pilot) Duralite. Outboard centrifuse drums.
F. Wheels: 10 Stud (Hub Pilot) 8.25 x 24.5 Aluminum Wheels (Polished outside, mill finish inside)
G. Tires: General Rib ST250 11R24.5 Tubeless Radials (Tire Brand Subject to Availability)
H. Miscellaneous: 1. 4" aspirator mounted between #3 & #4 hopper with part A and dust cap
2. Warranty - Standard with extended terms
1st 2 years 100%, 3rd yr 75%, 4th yr 50%, 5th yr 25% 6th yr 25%
3. Customer supplied parts, none.
I. Tractor Data (include weight of driver, fuel, and blower, if applicable) customer to supply at order
1. Front Axle Tare Weight (lbs):
2. Rear Axle Tare Weight (lbs):
3. Wheel Base (in):
4. 5th Wheel Height (fixed or slider):
5. Set Ahead (in):
