Right Sidebar Page Type Image

SPREAD AXLE

46'6", 48', 50'

APPLICATION Recommended for transportation of agricultural and industrial bulk commodities.

1. KINGPIN SETTING 20"- Single I-beam with 3/8" steel flanges, 1/4" steel full-width pickup plate.
2. SIDE PANELS Pre-painted white .048" and .063" aluminum, corrugated on 4" centers. Lower Rails-Aluminum 7-11/16" high extrusion. Side Posts- Aluminum extrusion 1-3/4" z-posts on 12" centers. Side Top Rails-Aluminum 5-5/8" x 6-1/4" extrusion. Interior Lining-.048" aluminum.
3. REAR PANELS Corrugated pre-painted white .048" aluminum panels and extruded aluminum posts.
4,5,6. STEP, LADDER & HANDHOLD Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder.
7. NOSE PANELS Smooth pre-painted white .063" aluminum.
8. FRONT CORNERS 6" radius, mill finish aluminum (color optional).
9,10,11 LIGHTS & WIRING Side Lamps - Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D., (1) amber L.E.d. mid turn/marker lamp. Nose Lamps - (2) High mounted amber L.E.D. lamps. Standard High mounted Rear Frame Lamps - (5) red L.E.D. marker lamps on rear header. Rear Tail Lamps- (6)-4" diameter, 7 diode L.E.D. lamps, flange mounted. Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground. Conspicuity Tape: Red and white reflective tape mounted in line with bottom row of side marker lamps and full width across rear of trailer. White reflective tape mounted on top corners of rear frame. (All lamps and wiring comply with FMVSS 108)
12. SUPPORT LEGS Square legs, with roadside removable crank, low-profile 10" diameter cushion foot shoe,
50,000 lbs. lift capacity. Located 98" from Kingpin on 46'6" & 48' trailers and 110" on 50' trailers.
13. HOPPERS Side panels of .080" aluminum with side slope angle of 43.5 degrees. Center and end panels of .100 aluminum with slope angle of 33 degrees. Riveted split tub design. End slope panels-.080" aluminum supported by aluminum channel with Z shaped member, 33 degree slope angle. Divider Panel - .080 aluminum.
14. TRAPS 26"W x 54"L openings with single door. The trap plates are 1/4"aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal. 102" wide trailers Add 6" to trap opening width. Hopper clearance 19" .
15. TRAP OPERATORS Each trap is opened and closed manually through a 2 speed gearbox with a 1" diameter output shaft connected through a U-joint to the double rack and pinion gears using a removable crank. There are trap locks on each gearbox. The double rack and pinion gears drive at both sides of each trap plate.
16. SUSPENSION CB2300 Neway suspension, 17" ride height with 23,000 lbs rating welded to the 5" round axle.
Suspension subframe beams are 4" x 8" x ¼" rectangular steel tubing. 8'8" spread on 46'6", 10'2" on 48', and 10'8" on 50'.
17. AXLES Meritor 22,500 lbs. beam capacity, 5" diameter, 5/8" wall, 71-1/2" or 77-1/2" track, integral spindles,
28-spline camshafts and Meritor MA212 brake lining. Axles have Cam-Master "Q+" quick-change brakes with 5.5" auto slacks.
18. HUB & DRUM Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
19. BRAKES 16-1/2" X 7" complying with FMVSS 121. Meritor/Wabco 4 sensor, 2 modulator with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
20. OIL SEALS Stemco Guardian
21. WHEELS Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
22. TIRES Eight (8) 11R24.5 Bridgestone R195F radials. ½" Black heavy-duty rubber Mudflaps, 24"W x 30"L.
23. TARP 18 oz. Shur-lok roll tarp with rear mounted crank. Three molded black plastic sidewall protectors.
24. TARP BOWS Eight (8) - 9" rise galvanized steel arch type on 46'6" trailers, nine (9) on 48' & 50' trailers.
25. PAINT COLORS Black corrosion resistant metal coating on all steel parts.

Timpte .jpg

Standard Super Hopper Features:

  • A Timpte Original! A functional ladder extension that stores in the upward position and is swung down to provide unequaled rear access.
  • (2) 36" Grab Handles are standard, on the rear of the trailer along with a 54" wide platform.
  • (6) L.E.D. Tail Lights with (5) L.E.D. Marker Lamps standard. (Stainless Steel Rear Panel optional)
  • A Timpte "Trade Mark", 4' smooth sides panels and 2 rows of side marker lights. Timpte's aerodynamic smooth side wall is tough, moisture proof and easily repaired if damaged.
  • Timpte "PC" rated side marker lamps provide excellent visibility from all angles and are covered by a 10 year vendor replacement limited warranty.
  • Timpte uses thicker .63" Aluminum in all high stress areas of Side Wall and Nose.
  • Each Timpte Low Torque Trap Doors rolls on (24) Ball Bearing Rollers. Door is operated by a time proven adjustable Rack and Pinion system. Large 26" X 36" door is standard on 40' X 42' Models. 24" X 26" on 38' Model.
  • Timpte Trailers are standard with 4 wheel end monitoring ABS Brake System (4S/2M) on all Super Hopper models. This system improves braking and tire wear over 2S/1M systems.
  • Timpte is standard with a Neway Air Ride Suspension. Dump Valve and oil filled Pressure Gauge are housed in a weatherproof box with sealed gasket to protect components.

 

 

<<Back