Heil 2040CF Super Flo Pneumatic Trailer - 5 Hoppers

A. VESSEL

1 Capacity- 2040 Cu. Ft. Super Flop Pneumatic - 5 Hoppers - 102" Wide

2. Tank Construction- Smooth exterior, internal rings. 5454-H32 aluminum vessel. Design Pressure: 14.7 P.S.I. Hydro tested at 22.5 P.S.I. 43 degree hopper slope

3. End Frame- Monocoque design with void sections over upper coupler and tandem.  102 in. wide trailers are not legal on all roads in all states

4. Interior Welds- Class I

5. Manholes- (5) 20" Heil heavy duty cast aluminum manhole covers, pressure type with six aluminum cam actuated adjustable hold downs and Nylon wear plates.   Mount one over each hopper.
Aluminum cam handles and nylon wear plates, replaceable wear plates under hold downs, two stainless steel cover retainers per manhole.
White neoprene gaskets in manhole covers.
Manholes hinge on streetside.

6. Shell Finish- Mill finish bulk trailer sheet.

7. Baffles- None

8. Documentation- Unit tested with water. Professional cleaning is recommended prior to initial loading to avoid possible contamination of cargo. 180 degrees F. maximum operating temperature.

9. Product Information- Hydrated Lime

10. Misc. Vessel- This Heil dry bulk trailer is designed and built for the highway transportation of dry granular commodities. It should only be operated on hard-surfaced roads. It is not designed for offroad use or for hauling any type liquid or semi-liquid (slurry). Use of this trailer for which it is not designed may cause damage and potential injuries. It is designed for US operations only.

B. TANK FITTINGS AND PIPING

1. Air Inlet Line- 3" Sch. 10 aluminum line with welded 3" adapter streetside front of tank. One (1) Bayco swing spring check valve near P.T.O. inlet. One (1) Bayco swing spring check valve upstream of front hopper discharge.

2. Aeration- Three (3) Solimar aerators with wear plates (part #223241 and #223261) per hopper. 3" Aluminum air manifold, extended to rear of trailer for rear plant site connection 2" hoses supplying air to aeration system.

3. Prop/Pres Ctl Valve- 3" Heil fig. 890 butterfly valve, aluminum body, 255 duplex stainless disc (1 piece disc & stem).  Locate streetside to regulate airflow to product discharge line.

4. Aeration Valve- 3" Heil fig. #890 butterfly valve, aluminum body, 255 duplex stainless disc (1 piece disc & stem).  Locate streetside to regulate air flow to 3" air manifold. (5) 2” brass ball valve for individual hopper control. One valve per hopper

5. Blow-Down Line- 3" Sch. 10 aluminum with Heil fig. 890 butterfly valve, aluminum body, 255 duplex stainless disc (1 piece disc & stem). Located streetside at front of tank.
15 PSI pressure relief valve.

6. Top Air Line- 3" Sch. #10 aluminum top air line with 3" Heil fig. 890 aluminum body butterfly valve (alum-bronze disc, black Nitrile seat).

7. Product Valve- 5" Heil fig. 890 butterfly, aluminum body, 255 duplex stainless disc (1 piece disc & stem), white Nitrile seat,  with powder coated steel handle.

8. Product Tee- Cast aluminum, non-gravity tees, 5" valve x 4" product line.

9. Product Line- 4" Sch. 40 aluminum line between hoppers. SureSeal aluminum groove to smooth pipe coupling with white gaskets between hoppers, aluminum groove to groove couplers at front and rear.

10. Rear Discharge Line- None. Product discharge to terminate at last tee with threaded end, 45 degree elbow and 4” cam & groove male fitting and dust cap.

11. Vacuum Inlet Line- None.

12. Load Line- None.

13. Cyclone Filter- None.

14. Gauges- Two (2) 4" liquid filled, one tank pressure, one line pressure. Gauge pressure range 0-30 PSI.

C. ACCESSORIES

1. Ladder- Rear center of head, aluminum, with serrated rungs & grab handles at top step.

2. Hose Tubes- 1 8" x 21' long aluminum hose tube located curbside rear of tank. Cast aluminum door at rear.

3. Walkway- Adhesive backed skid-resistant tape between toe rails.

4. Tire Carrier- None.

5. Cabinet- None.

6. Hose Holder- P.T.O. hose holder at nose.

7. Fenders- (2) Aluminum single contour front fenders.
(2) Aluminum double contour rear fenders.

8. Splash Guard- Anti-sail and anti spray for front and rear mud flaps.

9. Lights- 12 Volt Truck Lite flange mount LED lamp system complying to FMVSS with conspicuity markings each side and rear.
(2) Combination mid-tank clearance and turn signals, one each side.
(1) One oval third stop light, located rear center of trailer.

10. Wiring- 12-volt system, 7-wire, molded harness throughout. "Plug-together" modular style harness. 7-way SAE J560 connector.

D. CHASSIS

1. Upper Fifth Wheel- Hi-tensile steel, bolted and adjustable with 2" forged kingpin.

2. Skid Plate- None.

3. Landing Legs- Jost model A-HEIL magnum 2-speed landing legs, sealed gear box with arctic grade grease, 62,500 lbs. rated lift capacity with 10" x 12" sand shoes, and streetside crank.

4. Suspension- Hendrickson raised center axle AA-230-RC Air Ride Suspension, parallel axle, & brake system, 77.5" track, 5" round, 23,000 lb. axle beam rating, 49" axle spacing, with OEM single leveling valve. Heil R2R ("Ready-to-Run") Value Package - Includes Hendrickson's Five-Year wheel end warranty and factory supplied chambers, slacks, preset hubs, and drums.

5. Brake System- One (1) aluminum 2850 cu. in. air tank with rubber saddles and stainless steel  u-bolt mount.  System to meet FMVSS requirements. Haldex TRS 4S-2M ABS system, (4 sensor/2 modulator) with onboard monitor. Haldex TRS Roll Stability System. Philips "Quick Release" gladhand on service line. Constant power is standard on auxiliary (blue) center pin of SAE J560 7-way. 16.5" x 7" (quick change) S-cam type brake shoes - Heil's R2R Package includes extended service brake shoes (Premium ABEX 30/30-197 with 5/8" thick brake shoes)

6. Brake Chamber- OEM type 30-30 parking-emergency spring brake - Heil's R2R Package includes Haldex Life Seal (long stroke) Brake Chambers

7. Brake Lining- OEM brake lining.

8. Slack Adjuster- OEM (automatic) slack adjuster - Heil's R2R Package includes Haldex 5.5" automatic slack adjusters with grease fittings.

9. Axles- (2) Integral with air ride.

10. Oil Seals- Preset bearings with Premium oil seals and visible hub caps for Heil's R2R Package.

11. Paint- Dupont Imron 5000 series silver metallic paint on steel parts only (#N0217). Paint warranty: 3 Year prorated warranty steel parts, 4 year prorated warranty on aluminum parts.

12. Misc- None.

E. HUBS AND DRUMS

1. Hubs- (4) 10 Stud, "Hub Pilot" (single nut mount), aluminum hub for outboard drum (parallel spindle) (ConMet Preset dual aluminum wheel - stud length 33mm, two piece flanged wheel nuts) Hub lubrication -  75W90 synthetic gear oil (premium visible hub caps).

2. Drums- 4 Centrifuse - outboard mount brake drums (16.5" x 7").

F. Wheels

1. Wheels- (8) 10 Stud (Hub pilot - single nut mount), aluminum, machine finish, 24.5 x 8.25 disc wheels.

G. TIRES

1. Tires- (8) Bridgestone R195”, 14-Ply, 11R24.5 radial tires.