Portable Dry Bulk Storage Tank, Steel, Model 4050CF
Specifications
Compartments: One
Capacity: 4050 cubic feet, nominal
Weight-Empty: Approximately 23,500 Lbs.
Gross Weight (Max): 450,000 Lbs.
Product Weight (Max Shell Full): 107 Lbs./Cu.Ft.
Operating Pressure (Max): 15 PSIG
Temperature: 150F
Shell Material: #10 gauge hot rolled carbon steel. Designed per ASME code
Supports: 10 screw jacks with 1/4" steel screw supports with 3 1/2" jack screws and 3/8" X 30" X 30" reinforced pads. Level load rating with screws equally torqued on sound footing is #450,000.
Standard Equipment
Air Inlet Connection: 3" male with 3" aluminum dust cap, at front, curbside
Air Line: 3" OD steel tubing routed down streetside with one 3" flange mount swing check valve, at front near PTO connection, one 3" flange mount swing check valve upstream #1 hopper tee, mounted in horizontal position, or portable blower unit.
Product Line: 5" steel discharge to rear terminating at sreetside in front of axle, curved to outside.
Product Valves: Butterfly type - 6" with aluminum body.
Pressure Control Valve: Butterfly type - 3" aluminum body.
Pressure Relief Valves: Two - 2" set at 15 PSIG, one at front, one at rear, (1) 2" in air manifold set 18 PSIG.
Pressure Gauges: Two 4 1/2" gauges liquid filled, one tank, one line, mounted in box.
Aeration System: Cloth air pad, 30" outside diameter, 10-degree slope. Steel hopper bottom bolted to flange, 24 grade 8, 1/2" studs on 3-5/8" bolt centers.
Aeration Control Valve: One 2" ball valve, full opening with one 2" brass check valve horizontal mounted at each hopper, (1) 3" butterfly valve in air manifold at front.
Hoppers: 6 with 40-degree slope.
Load Lines: 2 - one at each end schedule 40 steel 4" with adaptor and cap accessible from ground.
Air Connections: One 3" at front for blower, one auxiliary on curbside rear at end of manifold ending with 3" Knappco flange mounted check valve and 3" male adaptor and dust cap.
Standard Equipment Cont.
Hoses: None
Blowdown: 5" butterfly valve located at top with necessary linkage operable from ground - one front, one rear, discharge side of blowdown valve has 5" male adaptor.
Manhole: One 20" - Knappco six latch with safety latches, at top curbside.
Support Legs: 10 full load carrying - retractable.
Ladder: Steel at manhole, removable at side with carry rack for transporting, inside ladder at manhole.
Suspension: Reyco 88 single axle with 8-leaf springs.
Air Brakes: 16-1/2 X 7 with automatic slack adjusters. Park brake chambers, one each wheel.
Oil Seals: National.
Axle: 22,000 Lb. Capacity, 5" round Rockwell TN4670GR1110.
Hubs & Drums: 10 Stud steel hub outboard cast drum (stud pilot).
Wheels: 10 Stud steel 8.25 X 22.5 (stud pilot).
Tires: 11R22.5 Radials.
Mudflaps: New SWP standard.
Lighting: 12-Volt system - complies with dot requirements
Paint: Gray Imron
Blower Unit: Diesel & Electric driven blower packages available on request
